User Manual

WipLL System Description
2-6 of 2-12 Issue 03
4Mbit - Draft 05
1QDF10134AAP-SYD-FCC
 Software upgrade of every WipLL unit using TFTP.
 Support for standard IP protocols – ARP, DHCP relay, TFTP, ICMP, and
SNMP.
2.1.11. System Parameters
 Temperature range of –30ºC to +60ºC.
 Compliance with ETSI and FCC Regulations.
2.1.12. RF
This environment consists of point to multi-point directional antennas pointing
towards the base station. Distances between stations and the base station may differ.
Some may be near while others may be far away.
Additional features include:
 Multi-site – mutual interference.
 Frequency hopping.
 Multi-rate: Sensitivity of the receiver changes and is dependent on the bit rate.
2.1.13. Network
 Ethernet packets – between 64 and 1518 bytes.
 Burst of packets or constant flow to/from users – depending on the application.
2.1.14. Application
Data – different types of applications generate requirements for:
 Assignment of delays.