User Manual

Air4G Installation Guide
Page 26 Commercial in Confidence UGD-D00229 Rev B
Air4G Base
Station parts
Consisting of
Note: The Sunshield brackets are only applicable for antennas that utilize
Mechanical Electric Tilt (MET). i.e. – Argus-SSPX310F.
Warning: A Sunshield is mandatory for temperatures of above 45°.
1 x Air4G Wall
mounting kit
Air4G-W24-WMK-3 – wall mounting kit with accessories included
Pole (& Wall)
Mounting Kit for
pole with 60-
120 mm
diameter, No
Tilt
(ordered
separately)
Air4G-W24-PMK-60-120-1 – Pole (with Wall) mounting kit for poles with
diameters 60-120 mm – including fixing accessories.
Pole (& Wall)
Mounting Kit for
pole with 120-
230 mm
diameter, No
Tilt
(ordered
separately)
Air4G-W24-PMK-120-230-3 - Pole (with Wall) mounting kit for poles with
diameters 120-230 mm - including fixing accessories.
1 x earth kit
1 x M5 screws
1 x M5 washers
1 x M5 spring washers
Alternative: SEMS screw (includes 2 washers)
AC/DC Power
Supply (PS)
Indoor power converter for 5.x GHz, 2.x GHz, 700 MHz
Indoor or Outdoor power converter for 3.xGHz
Type-IC DC
Power Cable
Available either in - 10, 15 or 30 meter lengths. Additional lengths available.
ODC Twin
Fiber Cable
(Multimode)
(optional)
(ordered
separately)
Available either in - 10, 15, 30, 50, 75 or 100 meter lengths.
Note: Maximum up to 500 meters as this is a multimode
interface.
Multimode fiber
pigtail cable
(not included)
(optional)
(ordered
separately)
Multimode fiber pigtail cable – ODC - LC connector. Terminates the outdoor
fiber cable and provides an indoor LC connector. 2 meter length.
Grounding
Cable
(required) (not
included)
Circular earth braid, 120A current (16 mm²), jacketed or not with cable size =
AWG 4 – 6 with lug (terminal) on enclosure side with hole M6