User Manual
Table Of Contents
- Copyright
- Table of Contents
- Summary of Figures
- Summary of Tables
- Warnings and Cautions
- DECLARATION OF CONFORMITY
- FCC Notice
- Maximum Output TX Power
- 1 About this Guide
- 2 Introduction
- 3 Getting Started
- 4 Verify Prerequisites
- 5 Install Air4G
- 5.1 Pole mount configuration
- 5.2 Wall mount configuration
- 5.3 Surge Protector Mounting
- 5.4 Air4G Connections
- 5.5 Install Air4G Antennas
- 5.6 Optional Mounting Antenna on Air4G
- 5.7 Cavity Filter Installation
- 5.8 External Duplexer Installation
- 5.9 Antenna Connection
- 5.10 GPS Antenna Assembly
- 5.11 LED Display
- 5.12 Install Junction Box (Optional)
- 6 Connect and Manage Cables
- 7 Set Power System
- 8 Initial WEB Configuration
- 9 Appendix A
- 10 Appendix C – Glossary of Terms
- 11 Appendix D – Installation Checklist
- 12 Appendix E
Air4G Installation Guide
Page 25 Commercial in Confidence UGD-D00229 Rev B
4.2 Verify Installation Requirements
4.2.1 Verify the Tools
Table 9 - Air4G installation tools
Tool
Large Crosshead Screw driver Phillips # 3 or Pozidrive # 3
Small flat blade screwdriver
Medium flat blade screwdriver
13mm or 1/2 inch open ended spanner
10mm or 13/32 inch open ended spanner
Wire strippers
Wire cutters
Ring terminals crimp tool
RJ45 crimp tool
4.2.2 Verify the Parts and Kits
Table 10 - Air4G installation parts and kits
Air4G Base
Station parts
Consisting of
1 x Air4G unit
Base station unit
2 x RJ45
Weatherproof
Connector
Covers
Weatherproof connector covers for use with standard cat 5 RJ45 network
connections.
Note: Previous versions had 3 RJ45 connections.
1 x mains cable
14AWG x 2
(ordered
separately)
30 meter lead with M17 3 pole plug
When distance from outdoor Power supply to Base Station is over 30 meters additional power
cable must be connected via a junction box (ordered separately) for total distance of up to 130
meters.
14AWG x 2 (ordered separately) – up to 40 meters
12AWG x 6 (ordered separately) – up to 100 meters
1 x Ethernet
RJ45
environmental
shroud
LTW IP68 or Amphenol environmental connector
Sunshield with
Antenna
Adaptor
(optional)
(ordered
separately)
Air4G-W24-Sunshield – Sunshield kit including quad antenna adaptor brackets
(x 2) – including fixing accessories.