User's Manual

AirHarmony-4000 (Integrated Duplexers) Installation Guide
UGD-D01080 Airspan Commercial and Internal Use 7
Maximum Output TX Power
Table 1: AirHarmony--4000 B26 FCC Maximum Output TX Power
Frequency Band
FCC
TX EIRP
Antenna Gain
851-869 MHz
46.16 dBm
57.54 dBm
13.5 dBi
Table 2: AirHarmony-4000 B26 ETSI Maximum Output TX Power
Frequency Band
ETSI
TX EIRP
Antenna Gain
851-869 MHz
46 dBm
TBD dBm
13.5 dBi
Caution: Do not set maximum output TX power to higher than local regulations.
Power Consumption
AirHarmony-4000 has a maximum nominal power consumption of 130W. AirHarmony-4000 power
consumption is described in the following table:
Table 3: Power Consumption
Duplex
Tx Power at RF Port
(dBm)
Nominal Power Consumption (W)
TDD- FC1
2 x 43
265
FDD
2 x 43
340
Antenna System
AirHarmony-4000 comes in a range of frequency variants that can be mounted with different
antenna options and formats. A typical installation will have a cross-polar sector or dual slant
antenna connected to the approprate Integrated Duplexers of the AirHarmony-4000 variant unit.
Various antennas are designed specifically for AirHarmony-4000 deployments; specifications are
available from Airspan separately.
Long Switched Beam Antenna
Long Switched Beam antenna variant includes a steerable antenna mounted on the unit with the
following specification. The antenna is a multi-element cross polarized (dual slant) design which can
be used in directional or Omni modes of operation.