User's Manual

AirHarmony-4400 (External Cavity Filters) Installation Guide
UGD-D01186 Airspan Commercial and Internal Use 18
2.2 AirHarmony-4400 Installation Checklist
Plan the installation of the AirHarmony-4400 by using the Installation Checklist, which you can find
as a removable job aid in Appendix A for this guide.
3 Verifying Prerequisites
Prior to installing the AirHarmony-4400, verify the required safety, power, tools, parts and
components. This chapter includes the hardware, software, and client requirements for installation.
Important: Set up requirements for the installation is detailed in the Job Sheet, see Appendix_A.
3.1 Verifying Site Requirements
To set up the AirHarmony-4400, an IP connection to a Netspan server is required.
3.2 Verify Installation Requirements
3.2.1 Verify the Tools
Table 7. Minimum Hardware Requirements
Tool
Use
Medium Phillips head screw driver
for securing the M5 Pan Head screws on Filter sets
#13 wrench
for securing the M8 Hex Head bolts on the
Pole/wall mount
Small flat blade screw driver (insulated
shaft recommended)
For AC power cable preparation
pliers
For AC power cable preparation
Knife
For AC cable preparation
Small side cutters
For AC power cable preparation
Wire strippers
For AC power cable preparation
1/2” Socket Wrench
For 5/16” Hex head (Lag) bolts when wall mounting