User's Manual

AirHarmony-1000D Installation Guide
UGD-D01083 Airspan Commercial and Internal Use 2
Warnings and Cautions
Human Exposure to Radio Frequencies
The AirHarmony-1000D antennas should be installed and operated from a minimum safe distance of:
 AirHarmony-1000D with External Antenna: 2.5m
 AirHarmony-1000D with Smart Beam Antenna (SBA): 2.5m
Radio Interference
This AirHarmony-1000D generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment on and off, the technician is encouraged to try to correct
the interference by performing one or more of the following measures:
 Re-orientate or relocate the unit
 Increase separation between the units and/or End Device
 Connect the equipment to an outlet on a circuit different from that to which the power source
is connected
Modifications
Any changes and modifications to this device that are not expressly approved by Airspan Networks
may void the user's authority to operate the equipment.
General
 Only qualified personnel should be allowed to install, replace, and service the equipment.
 The device cannot be sold retail, to the general public or by mail order. It must be sold to
operators.
 Installation must be controlled.
 Installation must be performed by licensed professionals.
 Installation requires special training. The AirHarmony-1000D radio and antenna should be
installed ONLY by experienced installation professionals who are familiar with local building
and safety codes and, wherever applicable, are licensed by the appropriate government
regulatory authorities. Failure to do so may void Airspan's product warranty and may expose
the end user or the service provider to legal and financial liabilities. Airspan and its resellers
or distributors are not liable for injury, damage or violation of regulations associated with the
installation of outdoor units or antennas.
 The device is to be installed in a Restricted Access Location.
Safety
1. Read this guide and follow all operating and safety instructions.
2. Keep all product information for future reference.
3. Static sensitive components inside - do not remove the lid or base: No user serviceable
parts inside.
4. Position the power cord to avoid possible damage; do not overload wall outlets.
5. Do not place this product on or near a direct heat source, and avoid placing objects on
the terminal.