User's Manual

AirHarmony-1000D Installation Guide
UGD-D01083 Airspan Commercial and Internal Use 28
5.3 Securing AirHarmony-1000D to the Mounting Plate
Note: The following procedure shown with the Front-Mount antenna variant as shown
below.
To mount AirHarmony-1000D to the mounting plate, perform the following:
1. Loosely fit the flange nuts on the studs protruding from the sides of the unit.
Figure 18: Lift unit to top of mounting plate
2. Hook the studs into the top slots of the mounting plate.
Figure 19: unit engages into slots on the top of mounting plate
3. With the studs engaged in the top slots raise the unit slightly until the bottom studs also drop
into their respective slots.