User's Manual

AirHarmony-1000D Installation Guide

UGD-D01083 Airspan Commercial and Internal Use 12

1 Introduction

This section provides a descriptive overview of the Airspan’s AirHarmony-1000D Micro / Pico eNodeB

variant and its place in the Airspan product suite.

1.1 AirHarmony-1000D

AirHarmony-1000D is part of Airspan’s carrier-class 4G Micro eNodeB family. AirHarmony-1000D

supports 3GPP’s Long Term Evolution (LTE) eNodeB specifications, providing high-speed data and

mobility in order to meet the demands of the Broadband Wireless Access market.

AirHarmony-1000D employs Software Defined Radio (SDR) technology, together with two transmit

and receive paths, antennas and a GPS receiver - all in a highly integrated, physically small and light,

All-Outdoor package, targeted to blend seamlessly into the urban environment. This very compact

outdoor product minimizes physical footprint, power consumption and operator OPEX.

AirHarmony-1000D will support a wide array of frequencies and channel sizes, able to operate in both

licensed and unlicensed bands. Frequencies and channel sizes will be added regularly.

AirHarmony-1000D implements dual 37 dBm (2 x 5W) transmitters with the availability of several

optional integral antennas and external antennas connectivity.

AirHarmony-1000D fully supports the standard LTE (Uu/S1/X2) interfaces.

All Airspan eNodeB products, including AirHarmony-1000D, are interoperable with a rich portfolio of

party end user devices, including many handsets, indoor UEs, outdoor UEs and USB dongles from

several ODMs, using various chipsets. For an updated of interoperability list, please contact your

nearest Airspan Sales Representative.

Note: For management please refer to the AirHarmony-1000D LTE Commissioning Manual as well

as the Netspan User Manual.

1.1.1 Deployment

A highly flexible and scalable 4G Base Station, the AirHarmony-1000D is capable of supporting LTE

profiles across multiple frequency bands.

Note: The following is for illustration only; actual layout may differ as infrastructure is installation-

specific.

Note: AirHarmony-1000D must be properly grounded according with NEC and other local safety

code requirements.