User's Manual

AirHarmony-1000D Installation Guide
UGD-D01083 Airspan Commercial and Internal Use 35
Figure 29: Power cable assembly
Caution: Do not over tighten the gland connector or the tail nut. The gland nut should be
tightened to a torque of no more than 3.3 Nm (2.43 lb-ft) max.
Note: When securing the cable verify there is no tension on the connector so that it is
easy to disconnect and re-connect for future maintenance actions.
Figure 30: Attach Power cable
Caution: The internal plastic parts of the mating connector are keyed. Take care to align
these by visual inspection or by gently rotating the connector body until the key way
sections align and the pins go in before tightening.
Figure 31: Power cable attached to AirHarmony-1000D