User's Manual
Table Of Contents
- 1.1 Purpose
- 1.4 Referenced Documentation
- 2.1 EasyST Frequency Ranges
- 2.2 Main Features
- 2.3 EasyST-2 Frequency Ranges
- 2.4 Main Features
- 2.5 Architecture
- 2.6 EasyST Protocol Stack
- 2.7 Theory of Operation
- 3.1 Package Contents
- 3.2 Minimum PC Requirements
- 3.3 Required Tools
- 4.1 Physical Dimensions
- 4.2 Ports
- 4.3 LEDs
- 4.4 LED Button
- 5.1 Connecting EasyST to a Computer
- 5.2 Connecting EasyST to Power
- 5.3 Verifying Correct Cabling
- 6.1 Desktop Mounting
- 6.2 Wall Mounting
- 8.1 Attaching the Antenna RF Cable
- 8.2 Mounting the External Antenna
- 13.1 Glossary of Terms
- 13.2 Revision History
- 13.3 Contact Information
EasyST Hardware Installation User Guide
Page 17 Commercial in Confidence UWB-D00128 Rev K
• Integrated IEEE 802.11b/g WiFi access point and 4 Port LAN Switch (EasyWiFi)
which allows you to add WiFi functionality to your EasyST.
• Integrated VoIP allowing connection of 2 conventional telephones (POTS) one
Ethernet and battery backup (EasyVoice) allowing you to add VoIP functionality to
your EasyST.
¾ Low cost
Note: Contact your Airspan representative for more information on the
EasyVoice extension module or the EasyWiFi extension module.
Note: Check product specifications for latest feature content.
2.5 Architecture
The EasyST is a self-install indoor unit requiring no professional installation. The EasyST
architecture includes the following components:
¾ EasyST module with clip-on antenna
¾ AC/DC power adapter with interchangeable plug prongs: plugged into a standard
electrical wall outlet (110/240 VAC, 50/60 Hz), supplying the EasyST with 6 VDC power
The EasyST provides a fast and easy mounting method by allowing you to simply place it on a
desktop/table. However, if an external antenna is used, the EasyST can alternatively be mounted
on a wall.
The figure below displays the EasyST architecture: