User's Manual

AirStream 4000/4001 WiMAX CPE User Manual

1 Introduction

Airspan’s WiMAX CPE products are 802.16e WAVE II compliant terminal devices designed for wireless service

operators to offer integrated wireless data and voice services over the 802.16e networks. The CPE products will

help service providers to rapidly reach targeted customer and gain market share.

Both indoor and outdoor models are available for different application environment needs and the end customer

can choose a variety of product models with different user interfaces (data port, voice port, and WiFi option).

The CPE can also support multiple frequency bands to meet different operator or country deployment needs.

The sophisticated QoS feature also helps service providers to better control data traffic in their wireless

networks. All Airspan CPE products are equipped with advance capability to differentiate end user traffic, marks

traffic with different priorities, and policing traffic at the edge of their networks. These capabilities are vital for

service providers to avoid service disruption caused by malicious users.

Airspan’s CPE products provide multiple management interfaces to allow local or over the air provision and

management of the device. The supported user management interface and management protocol include console

access, telnet, WEB, SNMP, FTP, TFTP, TR-069 and future OMA-DM. Airspan also offers standard based

device management solution for auto provision, firmware management and remote monitoring and maintenance.

Figure 1. WiMAX CPE Application in 802.16e Network

This manual provides user reference information necessary for configuration and provisioning of AirStream

4000/4001 CPE product. It can also be used by technical support engineers for troubleshooting and problem

resolution.