User's Manual

AirStream 4000/4001 WiMAX CPE User Manual
©1998-2010 Airspan Networks Ltd. All rights reserved Page 50
11.5.2 Defined Alarms
The following Alarms have been defined for IX253P CPE Device
Alarm ID Alarm Description
0x00000101 Node state alarm
0x00000102 Port state alarm
0x00000201 Media interface
0x00000206 H323 Register status
0x00000207 SIP Register status
0x00000801 Memory use status
0x00000802 CPU use status
0x80000104 Duplicate IP Address
0x80000105 Interface status change
0x80000106 Static route status change
0x80000107 Duplicate MAC Address
0x8000020D RAI Out of Upper Value
0x8000020E RAI Out of Low Value
0x80000301 Load file success
0x80000302 Load file failure
0x80000304 Flash data restore failed
0x80000801 CPU Tx packet failure
0x80000802 CPU Ethernet Rx packet loss
0x80000803 CPU Ethernet Rx busy
0x80000804 Lan Switch packet Tx collision
0x80000805 Lan Switch packet loss
0x80000806 RTP Rx packet loss
11.6 System Log
The CPE logs major system events automatically and store them in the system log, such as log in and out,
system upgrades, and reset, etc.
Click on “Log Information” in the Configuration Tree, the system log will be shown in the detailed
configuration window.
The chart below shows the system log of a CPE.