User's Manual

AirStream 4000/4001 WiMAX CPE User Manual
©1998-2010 Airspan Networks Ltd. All rights reserved Page 35
specified by user by dialing the service codes, e.g. *90075533639088 specifies that incoming calls
should be forwarded to 075533639088.
9.5.1 Service Codes Configuration
Many of the enhanced services need to be provisioned with the proper activation codes to work with the soft
switch. The default service codes are displayed below. Service codes are configurable.
The Conference ID filed is used to set the corresponding network conference server name used in the network
3WC calling service (Applicable to Sonus Switch Only).
9.5.2 Use of Enhanced Services
The enhanced services are divided into local CPE terminal services and network services. Except Blind Call
Transfer, Call Park and Call Pickup service codes are network based service activation codes, all other service
codes are local CPE specific service codes. They are used by the user to activate or deactivate IAD local
services via telephone dialing.
The CPE allows user to use a combination of flash hook and service codes dialing to access the enhanced
services. The following combinations of operation are commonly used for user service operation.
Flash hook + press 1 – terminate the current call and connect to the held or new pending call.
Flash hook + press 2 – hold the current call and connect to the held call or new pending call.
Flash hook + press 3 – conference two calls that are being connected or held.
Some typical uses of the enhanced services are briefly described in the following as examples: