User's Manual

AirStream 4000/4001 WiMAX CPE User Manual

7 Network Configurations

This section discusses the configuration to establish connectivity between a CPE and wireless network. When

clicking on the Network Configuration link, the following menu will be displayed.

7.1 WAN Networking

Click on “WAN Networking” in the Configuration tree. The web page in the detailed configuration frame will

show WAN IP Address Setting and DNS Configuration. For WiMAX access, dynamic IP should be enabled for

WAN interface.

7.1.1 WAN IP Address Setting

The interfaces can be shut down or brought up at electrical level. When the interface is up, the interface can be

enabled or disabled at logical level. The interfaces may acquire an IP address dynamically, or be given a static IP

address.

7.1.2 DNS Configuration

When wan interface acquires an IP address from the network, it is likely that information of DNS servers is

provided by the DHCP servers in the network. Manual setting is not necessary. But it is also possible to

manually specify DNS server address in the table above.

Note NAT must be enabled if DHCP server is enabled. DHCP server is

enabled by default.