User's Manual

AirStream 4000/4001 WiMAX CPE User Manual

6.2 Radio Control

The Radio Control management allows user to temporally disable the WiMAX connection. But by default, the

WiMAX radio will always be on when the CPE just powered up or undergo a restart.

The nearby BS list shows the list of Base Stations that the CPE device can connect to. The user can select and

switch to connect a different base station.

6.3 Operator Profile

The Operator Profile deals with configurations of wireless channel, preferred NAP and NSP setting for roaming

and network hand over processing.

The operator name and identifier can be added here. You can also choose to enable operator restriction or not.

Note the operator restriction needs to be configured with a valid operator identifier.

To configure a channel, the user must specify the frequency, channel bandwidth and frame duration. Multiple

channels can be added and the CPE will automatically search for available channel to connect.

Most of network setting will be pre-configured in factory for service operator. But if no channel is configured by

user, the default channel will be automatically added to the channel list during the device power on.