User's Manual

AirStream 4000/4001 WiMAX CPE User Manual
©1998-2010 Airspan Networks Ltd. All rights reserved Page 8
password. If the device WiMAX WAN IP assigned is within the same subnet as the LAN IP, the LAN IP by
default will be automatically switched to 10.10.0.1.
Input user name and password, and then click on the “OK” button. After a successful log on, the welcome page
of web management interface will appear.
Figure 2. Logon Web Page
4.2.2 Access CPE Device from WAN Segment
Service providers may access the CPE Web management interface remotely, by specifying the CPE wireless IP
address obtained after connecting to the service provider network.
As the wireless IP address is dynamically assigned by the service provider, the support technician may seek end
user’s help to find out the IP address of wireless interface for the CPE located in customer premise. The end user
can retrieve the wireless IP by following the instructions outlined in Section 4.2.1.
4.2.3 Welcoming Page
Once the user logs in into the WEB management server, the following Welcome page of IX253P CPE will be
displayed.