User's Manual

AirStream 4000/4001 WiMAX CPE User Manual
©1998-2010 Airspan Networks Ltd. All rights reserved Page 6
3 Getting Started
3.1 Packing list
Upon receiving the product, please unpack the product package carefully. Each product is shipped with the
following items:
CPE Products Quantity Note
Main Unit ODU
1
PoE adapterIDU
1
48V/0.4A DC Power Adapter 1
PC Ethernet Cable 1
User CD (optional) 1
Product Warranty Card 1
If you find any of the items is missing, please contact our local distributor immediately.
3.2 Installation
To power on the device, the indoor CPE should use a 48V/0.4A DC power supply from the adapter. All power
adapters can operate in 90-250V AC range and therefore can be used in different countries. Once the device is
powered, the user should wait for about 1 minute before the device becomes operational. A slowly flashing CPE
RUN LED light indicates the system has completed the startup procedure.
To connect PC, LAN switch or other type of IP device to the CPE, the user should use standard CAT5 Ethernet
cable and connect to the appropriate LAN port. Once connected the CPE LAN LED indicator should be on.
To use the phone service, user can simply plug the phone line into the CPE RJ11 port. If the line is not registered
or configured, a fast busy tone will be provided and corresponding LED light will be solidly on.
3.3 Connect
4 Managing CPE Devices
The WiMAX CPE product supports three main management interfaces: TELNET, WEB and TR-069
management from local or from remote central offices.