User Instructions

L INK
I NSTRUCTION
REVISION: A0
---------------------------------------------------------------------------------------
Doc. Link Instruction
Printing Date: 11/05/08 Page 5 of 5
• Through the serial connection type : cmd “showss”
• Verify you have one SS connected and operational
• For broadcasting video through Airspan Networks link please refer to the
link as a normal bridge (layer 2)
Note: Once the system detects a radar signal it will behave according to the
standard and stop transmitting on the channel. A new channel is chosen
and a startup scan is initiated on that channel. A report will be sending on
the Hyper Terminal Application.
Test Mode Commands
• Through the serial connection type:
1. G_DEBUG_DFS_DONT_MOVE=1 //// Do not jump channel
2. G_DEBUG_DFS_DONT_MOVE=0 //// jump channel
3. cmd "setDfsParams av=0" //// Disable availability test
4. cmd "setDfsParams av=1" //// Enable availability test
5. printRf //// Print RF channel
End Document