User Instructions

INK

NSTRUCTION

REVISION: A0

---------------------------------------------------------------------------------------

Doc. Link Instruction

Printing Date: 11/05/08 Page 2 of 5

1. Required equipment

• 2* Standard PC included Serial port and LAN port.

• Standard HyperTerminal Application.

• 2* SDA 4S.

• P.S 220VAC to 6V DC.

• 2* Ethernet cables.

• Crossed RS-232 cables.

• 2* Y cable.

2. Testing Setup

1ProST Setup Figure

• Connect Y cable between SDA 4S DB-15 connector and MicroMAX

DB-15 connector.

• Connect Serial cable between MicroMAX DB-9 connector and PC 1

Serial port.

• Connect LAN cable between SDA 4S port 1 and PC 1 LAN port.

• Connect Y cable between SDA 4S DB-15 connector and ProST

DB-15 connector.

• Connect LAN cable between SDA 4S port 1 and PC 2 LAN port.

2EasyST Setup Figure

• Connect Y cable between SDA 4S DB-15 connector and MicroMAX

DB-15 connector.

• Connect Serial cable between MicroMAX DB-9 connector and PC 1

Serial port.