User's Manual
Table Of Contents
- 605-0000-703
- EasyST 4.9 Installation Guide
- Read the Warnings and Cautions before installing or working on this equipment.
- WARNINGS
- DECLARATION OF CONFORMITY
- FCC INTERFERENCE STATEMENT
- ABOUT THIS GUIDE
- SYSTEM OVERVIEW
- GETTING STARTED
- PHYSICAL DESCRIPTION
- CONNECTING EASYST TO A PC
- CONNECTING EASYST TO POWER
- MOUNTING EASYST
- OPTIMIZING PERFORMANCE
- RESETTING TO DEFAULT SETTINGS
- ATTACHING CLIP-ON ANTENNA
- SPECIFICATIONS
- TROUBLESHOOTING
- GENERAL
- REVISIONS
- CONTACT INFORMATION
- COPYRIGHT INFORMATION
- WARNINGS AND CAUTIONS
- GLOSSARY
- INDEX
Specifications
31
Transient response (full to
half load)
± 1% max. dev.
500 uS recovery
Temperature coeffeicient ± 0.04% / °C
Ripple and noise 100mVp-p max
Protections Over voltage protection
(output voltage 7.5V)
Over power protection
Short circuit protection
Over current protection:
130% ˜ 160%
Efficiency 70% typical at full load
Hold-up time 5 ms @ 115 VAC full load
EMI / RFI VDE and FCC Class B limits
Dielectric withstand Input/output: 3000 Vac
Input/Ground: 1500 Vac
Safety meet UL/CUL UL60950
CE EN55022
Switching frequency 100 kHz
Connector for radio Input: interchangeable
prongs
Output: DC power jack
Cable length 1.25 m
Dimensions 86 × 46 × 33 mm
Weight 180 g
General
MTBF 100,000 hours (MIL-HDBK-217F)
Operating temperature 0 to +40°C
Storage temperature -20 to +85°C
Humidity 5 to 95% RH non-condensing
Vibration 2.4G, 5 to 500 Hz
Environmental
Cooling Free air convection