User's Manual

605-0000-703 EasyST 49 Installation User Guide-Rev D
30
Interfaces: 10/100BaseT (8-pin RJ-45)
DC power (DC power jack)
RF: Clip-on antenna (MCX
connector and 6-pin Antenna
Controller)
SIM slot (planned for future)
Plug-in expansion module through
30-pin IDC socket for the
following interfaces:
o 802.11 Wi-Fi -- planned for future
o LAN switch -- planned for future
o VoIP and Battery Backup --
planned for future
Power
requirements:
6 VDC, 4A, supplied by AC/DC power
adapter plugged into a standard electrical
wall outlet (110/240 VAC, 50/60 Hz)
Dimensions: With clip-on antenna: 130 x 145 x
145 mm (5.12 x 5.7 x 5.7 inches)
Without clip-on antenna: 30 x 145
x 145 mm (1.18 x 5.7 x 5.7
inches)
Mechanical
and
Electrical
Weight: With clip-on antenna: 0.426 kg
(approximate)
Without clip-on antenna: 0.3 kg
(approximate)
Power Adapter Specifications
The specifications of the AC/DC power adapter are listed in the table below:
Category Parameter Value
Input voltage 90 to 264 VAC
Input frequency 47 to 63 Hz
Input inrush current 30 A at 115 VAC
60 A at 230 VAC
Input
Earth leakage 0.4 mA max. @ 115 VAC
0.8 mA max. @ 230 VAC
Output rating 6V / 4A
Output voltage accuracy ± 2% max.
Max. output power 24W
Line regulation ± 1% max.
Output
Load regulation (full to half
load)
6 ˜6.5V