User's Manual

13
PHYSICAL DESCRIPTION
This section describes the EasyST's physical description:
Physical Dimensions
Ports
LEDs
LED Button (Planned for Future)
Physical Dimensions
The physical dimensions of the EasyST are listed in the table below:
Parameter Value
Dimensions
(height x width x
depth)
With clip-on antenna: 130 x 145 x 145 mm (5.12 x
5.7 x 5.7 inches)
Without clip-on antenna: 30 x 145 x 145 mm (1.18
x 5.7 x 5.7 inches)
Weight With clip-on antenna: 0.426 kg (approximate)
Without clip-on antenna: 0.3 kg (approximate)
Ports
The EasyST provides various ports on its top, bottom, and side panels, as described in the table
below:
Panel Port Interface
8-pin RJ-45 10/100BaseT Ethernet LAN Side
DC power jack 6 VDC power (supplied by AC/DC power adapter)
6-pin header Integrated Antenna Controller for attaching clip-on
antenna (determines active antenna--1 out of 4)
Top (cover
exposed)
MCX jack Clip-on antenna
30-pin IDC socket Plug-in extension board for the following interfaces
planned for future:
802.11 Wi-Fi and LAN switch
VoIP and Battery Backup
(The IDC socket accepts flat cables)
Bottom
SIM Authentication support (planned for future)
The figures below display the EasyST ports, which are located on the top (with the clip-on antenna
removed) and bottom panel respectively.