User's Manual
Table Of Contents
- 1 About this Guide
- 2 System Overview
- 3 Installation Prerequisites
- 4 Physical Description
- 5 Mounting the ProST
- 6 Network Cabling
- 7 Connecting to Power
- 8 Power Cable Connection
- 9 Connecting Lightning and Surge Protector
- 10 RSSI LED Plug Adapter for Antenna Alignment
- 11 Connecting External Antenna
- 12 Appendix
ProST Hardware Installation User Guide
Page 57 Commercial in Confidence UWB-D00111 Rev L
3. Verify that the power is received by the SDA-4S by checking that the POWER LED light is
on.
Figure45‐ConnectingtoACpower
Verify that your SDA-4S is on and receiving power by checking that the LED labeled POWER is lit
(see
2SDA-4S LED description). If it is not lit, see 2Troubleshooting.