User's Manual
Table Of Contents
- 1 About this Guide
- 2 System Overview
- 3 Installation Prerequisites
- 4 Physical Description
- 5 Mounting the ProST
- 6 Network Cabling
- 7 Connecting to Power
- 8 Power Cable Connection
- 9 Connecting Lightning and Surge Protector
- 10 RSSI LED Plug Adapter for Antenna Alignment
- 11 Connecting External Antenna
- 12 Appendix
ProST Hardware Installation User Guide
Page 47 Commercial in Confidence UWB-D00111 Rev L
Figure35‐ProST&SDA‐4S
6.2 Connecting to LAN Network
The ProST typically interfaces with the subscriber's LAN network using the indoor SDA-1 Type II
adapter. This adapter provides one 100BaseT interface. However, optional IDU adapters (SDA-
4S Type II, SDA-4S/VL Type II or SDA-4S/DC Type II) are offered that provide four LAN ports for
interfacing with the subscriber's LAN network.
Caution: Only subscriber terminal equipment (e.g. computer modem port)
that is designed for full compliance with TNV-1 telecommunication network
connectivity can be connected to the SDA-1. Warranty of Airspan's
equipment shall be made void if the SDA-1 is connected to a computer that is
not compliant with TNV-1.