User's Manual
Table Of Contents
- 1 About this Guide
- 2 System Overview
- 3 Installation Prerequisites
- 4 Physical Description
- 5 Mounting the ProST
- 6 Network Cabling
- 7 Connecting to Power
- 8 Power Cable Connection
- 9 Connecting Lightning and Surge Protector
- 10 RSSI LED Plug Adapter for Antenna Alignment
- 11 Connecting External Antenna
- 12 Appendix
ProST Hardware Installation User Guide
Page 29 Commercial in Confidence UWB-D00111 Rev L
Figure11‐ProSTports
Note: ProST models that use third-party external antennas provide an N-type
receptacle for attaching an external antenna.
4.2 SDA-1 Physical Description
The SDA-1 is an integrated Ethernet and AC/DC power supply adapter that simply plugs into a
standard electrical wall outlet (110/240 VAC). The SDA-1 enables easy plug prong replacement to
suit geographical location of electrical outlet sockets (e.g. American vs. European).
The SDA-1 provides the ProST with the following interfaces:
¾ 10/100BaseT interface with subscriber's network/PC
¾ 10 to 52 VDC power supply
The SDA-1 physical description is shown in the figure below:
Figure12‐SDA‐1