User's Manual

ManualsBrandsAirspan Networks ManualsElectronicsTerminal (subscriber) station EasyST 3.7 GHz TDD

Table Of Contents

INTRODUCTION
- Purpose
- Targeted Audience
- Referenced Documentation
- Conventions
WARNINGS AND CAUTIONS
- Human Exposure to Radio Frequencies
- Radio Interference
- Avoiding Radio Interference
- Modifications
- Manufacturer's Disclaimer Statement
DECLARATION OF CONFORMITY
- European Community, Switzerland, Norway, Iceland, and Liecht
- Declaration of Conformity with Regard to the R&TTE Directive
FCC INTERFERENCE STATEMENT
- Federal Communication Commission Interference Statement
- Maximum Output TX Power
SYSTEM OVERVIEW
- EasyST Frequency Ranges
- Main Features
- EasyST-2 Frequency Ranges
- Main Features
- Architecture
  - EasyST Models
  - EasyST Block Diagram
- EasyST Protocol Stack
- Theory of Operation
INSTALLATION PREREQUISITES
- Package Contents
- Minimum PC Requirements
- Required Tools
PHYSICAL DESCRIPTION
- Physical Dimensions
- Ports
- LEDs
- LED Button
CABLING
- Connecting EasyST to a Computer
- Connecting EasyST to Power
  - Changing the AC/DC Power Adapter's Prongs
  - Connecting the Power
- Verifying Correct Cabling
MOUNTING
- Desktop Mounting
- Wall Mounting
OPTIMIZING RF RECEPTION
CONNECTING THE EXTERNAL ANTENNA
- Attaching the Antenna RF Cable
- Mounting the External Antenna
REPLACING THE CLIP-ON ANTENNA
EASYST SMART CARD
RESETTING EASYST TO DEFAULT SETTINGS
TROUBLESHOOTING
TRADEMARKS AND COPYRIGHTS
CONTACT INFORMATION
REVISIONS
WARNINGS
- 1. Disclaimer
- 1.1 Safety Warnings
- 1.2 Important Warning Symbols
- 1.3 Important Service Information
- 1.4 UL Information
- 1.5 CE Notice
- 1.6 European Community, Switzerland, Norway, Iceland, and L
  - Declaration of Conformity with Regard to the R&TTE Directive
- 1.7 CAUTION
- 1.8 Lightning Protection
GLOSSARY
INDEX

Warnings and Cautions

- Install one RF lightning protector between the radio and antenna in series with the RF

cable.

- A lightning arrestor in series with the RF cable at the point of entry to the building.

- Install a lightning arrestor in series with the IF cable at the transceiver on the tower/mast.

- The AC wall outlet ground for the MacroMAX terminal must be connected to the same

grounding system as the radio and antenna lightning protectors.