User's Manual

ManualsBrandsAirspan Networks ManualsElectronicsTerminal (subscriber) station EasyST 3.7 GHz TDD

Table Of Contents

INTRODUCTION
- Purpose
- Targeted Audience
- Referenced Documentation
- Conventions
WARNINGS AND CAUTIONS
- Human Exposure to Radio Frequencies
- Radio Interference
- Avoiding Radio Interference
- Modifications
- Manufacturer's Disclaimer Statement
DECLARATION OF CONFORMITY
- European Community, Switzerland, Norway, Iceland, and Liecht
- Declaration of Conformity with Regard to the R&TTE Directive
FCC INTERFERENCE STATEMENT
- Federal Communication Commission Interference Statement
- Maximum Output TX Power
SYSTEM OVERVIEW
- EasyST Frequency Ranges
- Main Features
- EasyST-2 Frequency Ranges
- Main Features
- Architecture
  - EasyST Models
  - EasyST Block Diagram
- EasyST Protocol Stack
- Theory of Operation
INSTALLATION PREREQUISITES
- Package Contents
- Minimum PC Requirements
- Required Tools
PHYSICAL DESCRIPTION
- Physical Dimensions
- Ports
- LEDs
- LED Button
CABLING
- Connecting EasyST to a Computer
- Connecting EasyST to Power
  - Changing the AC/DC Power Adapter's Prongs
  - Connecting the Power
- Verifying Correct Cabling
MOUNTING
- Desktop Mounting
- Wall Mounting
OPTIMIZING RF RECEPTION
CONNECTING THE EXTERNAL ANTENNA
- Attaching the Antenna RF Cable
- Mounting the External Antenna
REPLACING THE CLIP-ON ANTENNA
EASYST SMART CARD
RESETTING EASYST TO DEFAULT SETTINGS
TROUBLESHOOTING
TRADEMARKS AND COPYRIGHTS
CONTACT INFORMATION
REVISIONS
WARNINGS
- 1. Disclaimer
- 1.1 Safety Warnings
- 1.2 Important Warning Symbols
- 1.3 Important Service Information
- 1.4 UL Information
- 1.5 CE Notice
- 1.6 European Community, Switzerland, Norway, Iceland, and L
  - Declaration of Conformity with Regard to the R&TTE Directive
- 1.7 CAUTION
- 1.8 Lightning Protection
GLOSSARY
INDEX

Cabling

Verifying Correct Cabling

Once you have connected the EasyST to the subscriber's LAN and to the power supply, you can

verify that you have cabled the EasyST correctly by checking the following EasyST LEDs:

Connection LED Color Correct

Status

Troubleshooting

Power power Red On If the power LED is off, recheck the

power cabling and that power exists at

the wall socket.

LAN lan Green On If the lan LED is off, recheck the LAN

cabling; ensure that you have connected

it to the correct LAN port on your PC and

that your network connection on your PC

is enabled.