User Manual
Table Of Contents
EasyST Hardware Installation User Guide
Page 30 Commercial in Confidence UWB-D00128 Rev K
5.3 Verifying Correct Cabling
Once you have connected the EasyST to the subscriber's LAN and to the power supply, you can
verify that you have cabled the EasyST correctly by checking the following EasyST LEDs:
Table11‐verifycabling
Connection LED Color Correct Status Troubleshooting
Power
power Red
On If the power LED is off,
recheck the power
cabling and that power
exists at the wall socket.
LAN
lan Green
On If the lan LED is off,
recheck the LAN
cabling; ensure that you
have connected it to the
correct LAN port on your
PC and that your
network connection on
your PC is enabled.