User Manual

EasyST Hardware Installation User Guide
Page 29 Commercial in Confidence UWB-D00128 Rev K
Figure10‐changeprongs
5.2.2 Connecting the Power
Once you have attached the correct plug prong to the power adapter, you can connect the power
cables.
To connect the EasyST to the power supply:
1. Before plugging the power cord into the electrical wall outlet, plug the AC/DC power
adapter's power cable (i.e. DC power jack) into the EasyST's DC power socket.
2. Plug the prongs of the AC/DC power adapter into the electrical wall outlet.
Figure11‐cordconnection