User Manual

EasyST Hardware Installation User Guide
Page 26 Commercial in Confidence UWB-D00128 Rev K
Customer (standard mode): Signal LEDs display SNR value as described in the
table above
Professional #1: provides technician with an indication of the modulation and FEC
used in the uplink
Professional #2: provides technician with indication of RSSI
Professional #3: provides technician with indication of downlink throughput (planned
for future)
¾ Resets EasyST to factory default settings
: To reset to default settings, hold down the
button for 10 seconds.
Note: When any of the Professional modes are active for 30 seconds, the
mode returns automatically to the Customer mode.