User Manual
Table Of Contents
EasyST Hardware Installation User Guide
Page 11 Commercial in Confidence UWB-D00128 Rev K
1 About this Guide
This section discusses the purpose, intended audience, conventions, referenced documentation
and organization for this document.
1.1 Purpose
This guide provides step-by-step instructions for setting up and installing the EasyST customer
premise equipment (CPE) is part of Airspan's WiMAX family of WiMAX-based products. EasyST
also has a multimode model (EasyST-2) based on the Rosedale chipset which supports both TDD
and FDD.
Note: EasyST-2 is presently available for frequencies, 3.4-3.6 and 3.6-3.8
only.
Note: For more information on the EasyST-2 contact your supplier.
The purpose of this User Guide is to provide step-by-step instructions for setting up and installing
the EasyST. These procedures include:
¾ System Overview
¾ Installation Prerequisites
¾ Physical description
¾ Cabling
¾ Mounting
¾ Connecting
1.2 Intended Audience
This guide is intended for the technician who is qualified and authorized to install the EasyST.
1.3 Conventions
Icon
Description
Checkpoint: Marks a point in the workflow where there may be an exit or
branch to some other procedure. At each Checkpoint the reason for an
exit or branch is given along with specific directions to locate the entry
point in the other procedure.
Reference: Gives a resource in the workflow that may be needed to
complete a procedure along with specific directions to use the resource.
Caution: Describes a possible risk and how to lessen or avoid the risk.
Advice: Provides a recommendation based on best practice.
Note: Provides useful information.