Installation Guide

AirSpeed 2900 gNB 5G OD Installation Guide

General

• Only qualified personnel should be allowed to install, replace, and service the equipment.

• The device cannot be sold retail, to the general public or by mail order. It must be sold to

operators.

• Installation must be controlled.

• Installation must be performed by licensed professionals.

• Installation requires special training. The AirSpeed 2900 should be installed ONLY by experienced

installation professionals who are familiar with local building and safety codes and, wherever

applicable, are licensed by the appropriate government regulatory authorities. Failure to do so

may void Airspan's product warranty and may expose the end user or the service provider to legal

and financial liabilities. Airspan and its resellers or distributors are not liable for injury, damage or

violation of regulations associated with the installation of outdoor units or antennas.

• The device is to be installed in a Restricted Access Location.

• Surge Arrestors and Transient Voltage Surge Suppressors installed external to the ITE are required

to comply with the appropriate CEC/NEC requirements.

• Equipment connected to the PoE port must have its own fire enclosure.

Important Safety Instructions

• Read and Save these instructions

• This Installation Guide contains instructions and warnings that should be followed during

installation, and operation.

• Failure to follow these instructions could cause bodily injury and/or product failure