Installation Guide

AirSpeed 2900 gNB 5G OD Installation Guide

4.2 LED Display

Two LEDs are displayed on the inside of the panel of the unit, providing unit status indication -

reporting system status: System / Access, Backhaul.

These are software controlled to provide a visual indication to the Installer and is illuminated once

power is applied to the unit. It can be turned off during normal operation.

There are two (2) LEDs on the unit:

• Backhaul LED – indicates if the unit is connected to the network

• System LED – see table below:

Table 8: System LED Function

State

Name

LED

Color

LED State

Description

Powering

White

On Continuously

Till running from operational SW image

Software

loading /

Startup

Green

Blinking (3Hz)

Till SW startup is finished and the product is

ready to radiate

Normal

operation

Blue

On Continuously

Normal operation (radiating).

During normal operation the LED will turn-

off after 10 min

Critical

alarm

Red

On Continuously

Service affected

Major

alarm

Orange

On Continuously

Service not affected