Installation Guide

AirSpeed 1050 Installation Guide
DUG01545 Airspan Commercial and Internal Use 36
8. Insert the LC Duplex cable into the transceiver. A “click” is heard when engaged.
Figure 47: Insert Cable into Transceiver
9. Insert the holder subset section from the front end of Transceiver.
Figure 48: Insert Holder over theTransceiver
10. Fix the holder into the housing base. A “click” is heard when engaged.
Figure 49: Holder into Housing Base
11. Secure the holder into the transceiver, “click” when engaged.
Figure 50: Holder into Transceiver