Installation Guide

AirSpeed 1050 Installation Guide
DUG01545 Airspan Commercial and Internal Use 22
4.1.2 Wall Mount Assembly
The following images show the bracket wall mount assembly.
1. Select the location on the wall to mount the AirSpeed 1050 mounting bracket.
2. Position the mounting clamp bracket as shown below. Be sure to position the mounting
bracket straight with level mounting to ensure the unit sits uniformly.
3. Mark the wall through the holes on the mounting bracket at the required height.
4. Attach the mounting bracket to the wall using wall plugs (x4) and appropriate screws rated
for at least 8-10 Kg per fastener.
Note: Wall plugs (x3) and necessary hardware are not supplied by Airspan and are the
responsibility of the installer. Recommended 3/8” dia. with appropriate wall plugs according to field
conditions.
Figure 6: Mounting Bracket on Wall
The mounting bracket is installed and ready for AirSpeed 1050 installation.