Installation Guide

AirSpeed 1030 B48 Installation Guide
DUG01623 Airspan Commercial and Internal Use 44
A Job Sheet
This job sheet enables the users to keep track of their installation. It covers all the prerequisites required
for accomplishing the AirSpeed 1030 B48 installation.
Site Requirements
o Position on Pole / Wall
o Access restrictions (local regulations) (when applicable)
o Method of reaching pole or wall positions (ladders, Elevated work platform)
o Configuration programming details known
o Point of connection for Ethernet (if applicable)
o All equipment items available at the installation site
o AirSpeed 1030 B48 unit
o Mounting bracket kit
o Cable assembly
Tool Requirements
(For further information, see Verify the Tools.)
o Large flat bladed screw driver
o 13 mm wrench
o 10 mm or 13/32 inch wrench
o Large pliers
o Hammer (to insert and set the wall plugs)
Required Ancillary Equipment
o Laptop PC for initial configuration
o Ethernet cable for temporary connection of the lap top