Manualshelf

Installation Instructions

ManualsBrandsAirspan Networks ManualsElectronicsWippLL Radio
11121314151617181920
Installing the SPR Hardware Installation Guide
10-16 Airspan Networks Inc. 02030311-07
To connect the RSSI LED adapter (see Figure 10-13):
1. Connect the 15-pin D-type male connector, at one end of the straight-through
cable, to the SPR.
2. Connect the 15-pin D-type female connector, at the other end of the straight-
through cable from the SPR, to the RSS LED adapter.
3. Connect the 15-pin D-type male connector, at one end of the straight-through
cable, to the SDA.
4. Connect the 15-pin D-type male connector, at the other end of the straight-
through cable from the SDA, to the RSS LED adapter.