User's Manual
Table Of Contents
- Hardware Installation Guide
- Contents
- About this Guide
- 1. Overview
- 2. Safety Guidelines
- 3. Package Contents
- 4. Required Tools
- 5. Radio Site Planning
- Part I: Base Station Installation
- Part II: CPE Installation - Subscriber Premises Radio (SPR)
- Part III: CPE Installation - Indoor Data Radio Indoor (IDR)
- A. Glossary
- B. Installing the BSPS
- B.1. Basic Design
- B.2. Physical Dimensions
- B.3. Electrical Site Requirements
- B.4. BSPS Cabinet Cabling
- B.5. Installation Summary
- B.6. BSPS Batteries
- B.7. Rectifiers
- B.8. Operating the System Controller
- B.9. Powering on BSPS
- B.10. Connecting BSPS Management Cables
- B.11. Cabinet Power Requirements
- B.12. Troubleshooting
- C. Cable Crimping
- D. Connector Pinouts for SPR with DB9
- E. Evaluating Link Quality
- F. Technical Specifications
- G. Third-Party External Antenna Specifications
- H. Declaration of Conformity

Hardware Installation Guide Overview
02030311-07 Airspan Networks Inc. 1-11
! SDA-4S/1H3L: provides a high priority port (left-most port) for VoIP
traffic.
! SDA-4S/VL/1H3L: combines the functionality of the SDA-4S/VL and
SDA-4S/1H3L models (i.e. VLAN for each port and a high priority port for
VoIP).
Figure 1-3 displays a typical subscriber site setup implementing an SPR and SDA.
Figure 1-3: Subscriber site with SPR and SDA units (optional RGW)