User's Manual

Hardware Installation Guide Serial Cabling
02030311-10 Airspan Networks Inc. 15-3
To connect the SPR to a PC for serial configuration (see Figure 15-2):
1. Connect the 15-pin D-type male connector, at the one end of the Y-cable, to
the SPR.
2. Connect the 15-pin D-type male connector, at the other end of the Y-cable,
to the SDA.
3. Connect the 9-pin D-type female (RS232) connector, at the other end of the
Y-cable, to the PC's serial port.
Figure 15-2: SPR serial cable connections using a Y-cable
Notes: For SPR serial configuration, the SPR remains connected to the SDA.