User's Manual

02030311-10 Airspan Networks Inc. 15-1

Serial Cabling

Serial CablingSerial Cabling

Serial Cabling

The SPR's 15-pin D-type port provides serial interface with a PC for configuring the

SPR through an RS-232 communication mode. The 15-pin D-type port uses three

pins for serial interface with a PC, and six pins for interfacing with the SDA (with

which the SPR is connected). A Y-cable (splitter) is used to connect the SPR's 15-

pin D-type port to both the PC and the SDA.

Notes:

1) SPR initial configuration is performed using Airspan's WipConfig program

(refer to the ASWipLL WipConfig User's Guide).

2) For customers with previous SPR models providing a 9-pin D-type port, the

serial cabling is identical to BSR serial cabling (see Part I, Chapter 9, "Serial

Cabling".

The SPR-to-PC and SDA cable connections for SPR serial configuration are as

follows:

 Connectors:

 SPR side: 15-pin D-type male (only 6 pins used)

 PC side: 9-pin D-type (RS-232)

 SDA side: 15-pin D-type male