User's Manual

Mounting the Devices Hardware Installation Guide
13-6 Airspan Networks Inc. 02030311-10
b. Align the mounting bracket's holes with the SPR's mounting holes as
displayed below. (The mounting bracket side that provides a groove for
inserting a nut must be aligned with the SPR's mounting hole that is
nearest to the SPR's rear panel.)
c. From the external sides, insert the M10-hex head screws through the
mounting bracket's holes and SPR's mounting holes. Loosely fasten with
the M10-hex nuts.
Figure 13-6: Attaching SPR to mounting bracket
6. Adjust the horizontal positioning of the SPR, and then tighten the two M10-
hex head screws with the M10 hex nuts.