User's Manual

Hardware Installation Guide Mounting the Devices
02030311-10 Airspan Networks Inc. 13-5
Note: Airspan does not provide screws for attaching the mounting bracket to
the wall. The screw size depends on the structure of the building to which the
bracket is to be attached. When selecting screw sizes, consideration must be
given to the weight of the SPR and load that may be induced in wind
y
conditions.
Figure 13-5: Attaching mounting bracket to wall
5. Attach the SPR to the mounting bracket by performing the following:
a. Slide an M10-spring lock washer and then an M10-plain washer onto
each M10-hex head screw (ensure lock washer is nearest to head of screw
bolt).