User's Manual

Hardware Installation Guide Mounting the Devices
02030311-10 Airspan Networks Inc. 13-3
A 1-meter separation is required between SPRs when on the same sector and
transmitting to the same BSR without requiring shielding (see Figure 13-3).
1.0 metre
Figure 13-3: SPR separation when transmitting on the same sector to the same BSR
SPR wall mounting is performed in two stages:
 Attaching the mounting bracket to the SPR's mounting holes.
 Attaching the mounting bracket (attached to the SPR) to the wall.
To wall mount the SPR:
1. Position the mounting bracket on the mounting surface (e.g. wall), and then
use a pencil to mark the position of the four mounting holes. Figure 13-4
displays the fixing dimensions. Ensure that the distance between the hole
centers are 120 mm (height) and 60 mm (width).