User's Manual

Installing the BSDU Hardware Installation Manual
5-12 Airspan Networks Ltd. 02030311-03
5.3.6. Connecting Cables for BSDU Serial
Management
The BSDU’s front panel provides a 9-Pin D-type port for serial management
(labeled Monitor) of the BSDU. Serial management allows you to connect the
WipLL’s network management system (WipConfig) to BSDU without assigning
BSDU an IP address.
! Connector: 9-pin D-type male
! Cable: straight-through
! Connector pinouts:
9-Pin D-type Connector
Pin Signal
1
Not connected (NC)
2
RX
3
TX
4
NC
5
NC
6
NC
7
NC
8
NC
9
NC