User's Manual

Installing the BSDU Hardware Installation Manual
5-8 Airspan Networks Ltd. 02030311-03
5.3.3. Connecting to 100Base-T Networks
The BSDU’s front panel provides two RJ-45 ports for connection to 100Base-T
(labeled 100Base-T) ports. The 100Base-T ports are for connection to the
management station and Ethernet.
Connector: 8-Pin RJ-45 (male)
Connector pinouts:
Pin Name Description
1 TX+ Transmit Data+
2 TX- Transmit Data-
3 RX+ Receive Data+
4 NC Not connected
5 NC Not connected
6 RX- Receive Data-
7 NC Not connected
8 NC Not connected
5.3.3.1. 100Base-T LED indicators
The BSDU front panel includes three LEDs for each of the two 100Base-T ports.
These LEDs are described in the following table:
LED Status Meaning
On Data is received through the port
Rx
Off No data is received through the port
On Correct physical link between devices
Link
Off No physical link between devices
On Power is supplied to port
100
Off No power at port