User's Manual

Installing the BSDU Hardware Installation Manual
5-6 Airspan Networks Ltd. 02030311-03
Figure 5-5 shows a rear panel view of the BSDU.
Earth Stud
GPS port
Six BSR ports
Figure 5-5: BSDU rear panel
Note: Airspan supplies unterminated cables for 15-Pin D-type and N-type
connectors. Refer to the cable crimping procedures for these connectors in
Appendix B, “Cable Crimping".
5.3.1. Connecting BSRs to the BSDU
The BSDU rear panel provides six 15-Pin D-type connectors for connecting a
maximum of six BSRs. For a detailed description of connecting BSRs to the BSDU,
see Chapter 4, “Installing the BSR”.
Note: A maximum of six BSDUs can be installed at a base station, allowing
the connection of up to 36 BSRs.
! Connector: 15-Pin D-type (male)
! Connector pinouts: see Chapter 4, “Installing the BSR”.