User's Manual

Installing the BSR Hardware Installation Manual
4-8 Airspan Networks Ltd. 02030311-03
The Y-cable connector pin assignments is displayed in Figure 4-4.
Figure 4-4: Y-cable connector pin assignment
To connect the BSR to the PC and SDA/BSDU for serial configuration:
1. Connect the 15-pin D-type male connector, at the one end of the Y-cable, to the
BSR, as displayed in Figure 4-5.
2. Connect the 15-pin D-type male connector, at the other end of the Y-cable, to
the SDA or BSDU, as displayed in Figure 4-5.
3. Connect the 9-pin D-type (RS232) connector, at the other end of the Y-cable, to
the PC, as displayed in Figure 4-5.