User's Manual

Hardware Installation Manual Installing and Configuring the IDR
02030311-03 Airspan Networks Ltd. 10-11
10.1.3. Connecting a Third-Party External Antenna
The IDR provides a TNC-type connector for connecting the IDR to a third-party
antenna. This antenna can be placed on the subscriber’s window sill to provide
better RF signal reception.
Note: Airspan supplies unterminated cables for N-type connectors. Therefore,
refer to the cable crimping procedures for N-type connectors detailed in
Appendix tbd, “Cable Crimping".
Connector: TNC-type
10.1.4. Connecting to an Ethernet Network
The IDR provides one Ethernet interface for the subscriber’s Ethernet network. This
port is located on the front panel, and labeled Ethernet.
Connector: 8-Pin RJ-45
Cable: CAT-5e
Connector pinouts:
Pin Function
1 RX+
2 RX-
3 TX+
4
N
ot Connected
5
N
ot Connected
6 TX-
7
N
ot connected
8
N
ot connected