User's Manual

Installing the BSPS Hardware Installation Manual

7-22 Airspan Networks Ltd. 02030311-03

1 5

6 9

COM

Figure 7-14: BSDU’s 9-pin D-type Connector Pinouts

Note: See Chapter 5, “Installing the BSDU” for detailed connector pinouts.

7.4.1. BSPS Troubleshooting

The table below indicates methods of solving problems that may arise during the

BSPS installation process.

BSPS troubleshooting tips

Symptom Possible Cause Remedy

FAULT LED is

blinking

One or more rectifier modules

are faulty

Replace the faulty rectifier/s

FAULT LED is on

• Any breaker is left open

• Abnormal input or output

voltages

• Over temperature

• LVD is open

• Battery test failed

• Check all breakers

• Check line voltage and load,

rectifiers may be over-loaded

• Check the temperature sensor

• Check the line, general check

• Check the battery breaker, cables

and replace battery if none of this

helps