Product Info

WipLL Radio Technology - Physical Layer System Description
2-38 Airspan Networks Inc. 25030311-08
2.6.6.3.1. Intra-system Interference
As mentioned previously, 1.33 Msps mode is achieved by using wider channel
bandwidth. This results in a higher bit rate at the expense of increasing adjacent
channel interference. This difference can become critical mainly for licensed bands
in which the available spectrum might be very limited. It is beyond the scope of this
document to provide specific rules regarding the preferred mode as a function of the
available spectrum. This is due to the fact that such analysis depends on many
parameters such as the cell layout and the topography of the coverage area.
However, it should be evaluated during radio planning.